I’m just going to use a small, flathead screwdriver, and I’m going to get right here, up under there, and I’m going to pull this pin out ever so slightly. Now, in the owners manual, it shows people doing this with a piece of brass. You just have to work this pin off of the frame a little bit and get out from behind the frame. So, you don’t have to pull the trigger first or anything like that. But what you do have, right here on the left side of the frame, is this is the takedown pin, right here. It has the trigger, it is the magazine release, and that’s it. Now, the weapon only has a couple of controls. Now I’m going to lock it up like this, by making a lever with my hand and physically inspect the chamber. Let’s clear lock and show safe, this weapon. This one only came with one magazine and it does not, this particular version, did not come with a piece of brass in a sealed envelope. It also has a trigger lock assembly which comes in this little plastic bag with instructions on how to put it on. If you ever lose this, Kel-Tec will send you another one for free. It comes with a well illustrated color owners manual which I found to be extremely helpful. The box comes with, first of all, the weapon. Now you can lock this box up with either a padlock or a tie, but you know anybody with a screwdriver could force their way into it. But this is a small compact polymer box for small compact polymer weapon. I apologize, the distributor put a big nasty label over the top. Now, let’s take a look at the box and you can see it’s a Kel-Tec box. This is a field strip disassembly and reassembly video of the Kel-Tec 3AT. I’m David Reed with Reed and Ward, the makers of CCW Guardian, the premier smartphone app for CCW permit holders.
0 kommentar(er)
